Call us at 1-888-826-6342
High Performance, Top Mount Accelerometers
Premium Grade Top Mount Accelerometer
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $392.79 |
| 10-24 | $373.15 |
| 25-49 | $365.29 |
| 50-99 | $349.58 |
| 100-199 | $341.73 |
| 200+ | $333.87 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Premium Grade
- Intrinsic Safety Certified Options
- Hermetic Design
- ESD Protection UReverse Wiring Protection
ACC793 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Acceleration Range
Frequency Range (Nominal)
Output Type
Mounting Type
Features
- Amplitude Non-linearity 1%
- Base Strain Sensitivity 0.0005 g/microstrain
- Connection Type 2 pin
- Electrical Noise Broadband 2.5 Hz to 25 kHz: 600 µg
- Electrical Noise Spectral 10 Hz: 8 µg/=Hz
- Form Factor 1/4-28 tapped hole
- Input Current 2 to 10 mA
- Grounding Isolated case
- Measurement Type Speed
- Output Impedance 100 Ω
- Resonance Frequency 25 kHz
- Seal Material Hermetic to 10-8 cc/s
- Vibration 500 g peak
- Transverse Sensitivity 5% of axial
The OMEGAROMETER™ Series accelerometers are designed for industrial vibration measurements. These accelerometers feature a hermetically sealed 316L stainless steel case suitable for harsh environments. The ACC793 is a high performance accelerometer with a top cable exit. FM and CSA intrinsic safety approval is an available option.
SPECIFICATIONS:
DYNAMIC
Sensitivity, ±5%, 25°C (77°F): 100 mV/g
Acceleration Range: 80 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
±5%: 1.5 to 5000 Hz
±10%: 1.0 to 7000 Hz
±3 dB: 0.5 to 15,000 Hz
Resonance Frequency: 25 kHz
Transverse Sensitivity, Max: 5% of axial
Temperature Response: -50°C (-58°F) = -10%; 120°C (248°F) = 5%
ELECTRICAL
Power Requirement:
Voltage Source: 18 to 30 Vdc
Current Regulating Diode1: 2 to 10 mA
Electrical Noise (Equiv. g, Nominal):
Broadband: 2.5 Hz to 25 kHz: 600 µg
Spectral:
10 Hz: 8 µg/√Hz
100 Hz: 5 µg/√Hz
1000 Hz: 5 µg/√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage: 12 Vdc
Grounding: Isolated case, internally shielded
ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Base Strain Sensitivity, Max: 0.0005 g/microstrain
Sealing: Hermetic to 10-8 cc/s
PHYSICAL
Weight: 112 g (3.9 oz)
Case Material: 316L SS
Mounting: ¼-28 tapped hole
Output Connector: 2 pin, MIL-C-5015 style
Connections:
Pin A: Power/signal
Pin B: Common
Mating Connector: Amphenol 97-3106A-10SL-4S type
Recommended Cabling: ACC-CB7-10
Agency Approvals:
FM: Class I, II, III, Division I, Groups A, B, C, D, E, F, G; Division II, Groups A, B, C, D, F, G
CSA: Class I, Division I, Groups A, B, C, D
SPECIFICATIONS:
DYNAMIC
Sensitivity, ±5%, 25°C (77°F): 100 mV/g
Acceleration Range: 80 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
±5%: 1.5 to 5000 Hz
±10%: 1.0 to 7000 Hz
±3 dB: 0.5 to 15,000 Hz
Resonance Frequency: 25 kHz
Transverse Sensitivity, Max: 5% of axial
Temperature Response: -50°C (-58°F) = -10%; 120°C (248°F) = 5%
ELECTRICAL
Power Requirement:
Voltage Source: 18 to 30 Vdc
Current Regulating Diode1: 2 to 10 mA
Electrical Noise (Equiv. g, Nominal):
Broadband: 2.5 Hz to 25 kHz: 600 µg
Spectral:
10 Hz: 8 µg/√Hz
100 Hz: 5 µg/√Hz
1000 Hz: 5 µg/√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage: 12 Vdc
Grounding: Isolated case, internally shielded
ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Base Strain Sensitivity, Max: 0.0005 g/microstrain
Sealing: Hermetic to 10-8 cc/s
PHYSICAL
Weight: 112 g (3.9 oz)
Case Material: 316L SS
Mounting: ¼-28 tapped hole
Output Connector: 2 pin, MIL-C-5015 style
Connections:
Pin A: Power/signal
Pin B: Common
Mating Connector: Amphenol 97-3106A-10SL-4S type
Recommended Cabling: ACC-CB7-10
Agency Approvals:
FM: Class I, II, III, Division I, Groups A, B, C, D, E, F, G; Division II, Groups A, B, C, D, F, G
CSA: Class I, Division I, Groups A, B, C, D
RoHS 2015/863 - View Certificate
CE Approved
UKCA
Are the Accelerometers able to be adjusted to a more limited peak g force range? say 10g, or changing the sensitivity of the device from 100mV/g to 500mV/g?
Thank you for your question. Unfortunately, the accelerometers are not able to be adjusted. The sensitivity and hence the g range is fixed. Please contact our Tech Support if you have any future questions we can assist you with.
Date published: 2019-04-12
Accessories