When small load measurements are required, the OMEGA ® LCL Series thin beam load cells are exceptionally well suited. The LCL Series is designed to measure many different parameters found in medical instrumentation, home appliances, process control, robotics, automotive and many other high volume applications. A specially developed integrated strain gage includes all balancing, compensating and conductive elements and is laminated to the beam to provide excellent stability and reliability.
SPECIFICATIONS Excitation: 5 Vdc, 12V max Rated Output: 2 mV/V ±20% (to minimize ±20% tolerance, end user must calibrate with a known weight) Zero Balance: 0.3 mV/V Combined Error: 0.25% FS Operating Temperature: -54 to 93°C (-65 to 200°F) Compensated Temperature: -7 to 49°C (20 to 120°F) Temperature Effects: Zero balance: 0.02% FS/°F Output: 0.02%/°F Resistance (Input and Output): 1200 ±300 ? Insulation Resistance: 1000 ? @ 50 Vdc Seal: Urethane coated Safe Overload: 150% FS Full Scale Deflection: 0.25 to 1.27 mm (0.010 to 0.050") Lead Wire: 9" shielded PVC 4-conductor 30 AWG Material: >816 gf (2lb): 301 SS ?816 gf (2 lb) beryllium copper
There is no gage factor associated with this load cell. We only supply the mV/V sensitivity (2 mV/V). FYI, The LCL-113G is current not available.
Answered by: Applcations Engineer JK
Date published: 2023-03-12
Can I connect this to an Arduino?
Asked by: sensorgirl
Thank you for your inquiry. The LCL load cell is a full strain gage bridge. If the nominal 5VDC excitation is applied to the load cell it will produce a 0 to 10mVDC over it's calibrated load range. You will need to verify if the Arduino will accept this low level signal.